Solution and ageAgeing is a process used to increase strength by producing precipitates of the alloying material within the metal structure. Solution treatment is the heating of an alloy to a suitable temperature, holding it at that temperature long enough to cause one or more constituents to enter into a solid solution and then cooling it rapidly enough to hold these constituents in solution. Subsequent precipitation heat treatments allow controlled release of these constituents either naturally (at room temperature) or artificially (at higher temperatures). Solution and ageAgeing is a process used to increase strength by producing precipitates of the alloying material within the metal structure. Solution treatment is the heating of an alloy to a suitable temperature, holding it at that temperature long enough to cause one or more constituents to enter into a solid solution and then cooling it rapidly enough to hold these constituents in solution. Subsequent precipitation heat treatments allow controlled release of these constituents either naturally (at room temperature) or artificially (at higher temperatures). Chuyên mục Tạp chí thường kỳ Tên bài ẢNH HƯỞNG XỬ LÝ NHIỆT KẾT HỢP DUNG DỊCH MÀNG PHỦ BẢO QUẢN LÊN CHẤT LƯỢNG NHÃN ‘TIÊU DA BÒ’ TRONG ĐIỀU KIỆN TRỮ LẠNH Tên tác giả Nguyễn Văn Phong, Nguyễn Thanh Tùng Title Effect of heat treatment in combination with preservative coating solutions on quality of “tieu da bo” longan under low temperature storage Abstract To evaluate the effect of heat treatment in combination with preservative coating solutions on quality of “tieu da bo” longan fruit under low temperature storage. Two experiments were established as follow: (i) the first experiment was done by dipping the longan fruits into 1% (w/v) chitosan coating of citric acid solution having (pH=2.4; 2.5; 2.6 and 2.,8); 0.5% (w/v) commercial citrex coating solution (pH=3.3) and water (as the control) for 0.5; 1; 2 and 4 minutes and finally packed in PE holed bags and stored at 5oC; the second experiment was done by submerging the fruits in hot water at temperatures of 45; 47 and 49oC for 4 minutes and followed by dipping into the best preservative coating solution treatments, which were selected from the 1st experiment and finally packed in PE holed bags and stored at 2, 5 and 10oC. Results from these two experiments are summarized as follows: (i) longan fruits treated with the chitosan coating solution at pH 2.6/ 2 minutes or citrex at pH3.3/4 minutes could be maintained the good fruit quality for 21 days at storage temperature of 5oC. (ii) Hot water treatment at 47oC and then dipped into a solution of citrex (pH 3.3)/4 minutes and finally storaged at 5oC was the best combinated treatment to control browning pericarp and maintain quality of longan for 21 -28 days. Giải pháp xử lý nhiệt-Lò nướng màu xanh lam làm cứng để xử lý các bộ phận đúc hợp kim nhôm Bộ phận đúc hợp kim nhôm Giải pháp xử lý gia nhiệt-Lò làm cứng 1. Ứng dụng
• Xử lý nhiệt vật liệu hợp kim nhôm phù hợp với tiêu chuẩn quân sự Hoa Kỳ SAE AMS 2772E-2008
• Lò làm cứng dung dịch nhôm thẳng đứng, còn được gọi là lò làm cứng dung dịch nhôm đáy thả, công nghiệp sản xuất ô tô và thiết bị điện cao áp. • Lô nhỏ, chất lượng cao ― sự lựa chọn tốt nhất cho giải pháp xử lý nhôm !! 2. Thông số
3. Đặc điểm kỹ thuật chính
4. Làm việc tại công trường 5. Giới thiệu công ty - Được thành lập vào tháng 1 năm 2003, đến nay có 56 nhân viên - Doanh số 50 triệu RMB vào năm 2020 - Tập trung vào một ngành - "đúc nhôm" - Có đầy đủ dòng sản phẩm thiết bị đúc nhôm, tất cả các sản phẩm đều được nghiên cứu độc lập và phát triển, sản xuất - nấu chảy và giữ nhôm, vận chuyển, gia nhiệt sơ bộ gáo, tinh chế chất lỏng nhôm, chất lỏng nhôm đo hydro, cho đến thiết bị xử lý lão hóa dung dịch nhôm 6. Chứng nhận CE 7. FRQ Q1: Tôi
biếtokhông có gì về máy này, loại máy nào tôi Nên chọn?
|