Does UE boom have an app?

UE BOOM is an application developed by Logitech Europe S.A. for Ultimate Ears speakers and with everything you need to make the most of your UE speaker. The application allows you to associate music that you select on your smartphone to be played by all connected speakers.

UE BOOM is an application that allows you to access all your favorite features for all BOOM and MEGABOOM loudspeakers. It also works with BOOM, BOOM 2, BOOM 3, MEGABOOM and MEGABOOM 3. In total, the app allows you to connect up to 150 speakers of the brand to organize your parties anywhere and anytime . But, it is also used to:

• Use the app to activate their Ultimate Ears portable speaker. It will play your favorite songs, activate your Spotify playlists, Pandora stations and more;
• Use and set up fully customizable EQs to adjust midrange, treble and bass to fit your playlist;
• Customize your speaker name, EQ preferences and preset playlists (BOOM 3 and MEGABOOM 3 only).

Recently updated, the application presents a lighter overall design. Most of the features have been maintained except for a few (including the alarm functions and the connection via Amazon Alexa).

The speaker is turned on but is not producing any sound.

Check if the volume on the speaker is too low to hear by pressing the “+” button multiple times

Check to see if the volume on your bluetooth device is turned off. If unsure, try turning up the volume via the volume buttons on the side of the device or the volume slider on the display of the device.

Insure that your device is properly connected to the speaker by checking your Bluetooth Pairing.

After pressing the power button for the proper amount of time, the speaker does not turn on properly.

When attempting to turn on the speaker, if the power button blinks red or says ‘Critical Battery’, this indicates the battery is not charged enough to operate. Plug the speaker in using the given cable and power brick to charge most efficiently, approximately 3-4 hours. Plugging into a laptop or similar device will also charge the speaker, but will charge at a severely reduced rate.

Battery’s have a lifespan, if the battery is not holding a charge (i.e. states it is fully charged and lasts no where near the 13-15 hours operating time). Replacement of the battery may be required, refer to our battery replacement guide.

Although the speaker boasts an IPX7 Waterproof rating, manufacturing errors happen. If the speaker is unresponsive to charging and battery replacement, then the circuits in the speaker could be fried. Refer to our motherboard and D-ring replacement guides.

The Speaker is plugged in, but will not charge.

If your cable is poorly connected to the charging adapter or device it will not charge. Additionally check if the charging adapter is properly connected to the wall socket. Disconnect and reconnect everything to ensure proper connection.

Charging adapters and cables can fail at times. To check if they have failed test them on other micro usb powered devices. Alternatively, test other similarly rated charging adapters and cables with the Boom 2. Replacement cables and adapters can be purchased directly from Ultimate Ears.

Batteries are consumable and eventually cease to store a charge. If none of the other solutions resolved your charging issue the problem may be the battery. Refer to our battery replacement guide.

The UE Boom 2 is not connecting to my device via Bluetooth, the speaker is not working properly, and/or my speaker is not playing music.

Check and make sure that Bluetooth pairing is enabled on the device you are trying to pair to the speaker. Select the UE Boom 2 from the list of devices, and make sure the UE Boom 2 is ready to be paired with by pressing the Bluetooth button on the speaker (see next problem).

Make sure your speaker is in pairing mode by pressing and holding the Bluetooth pairing button on your speaker above the power button until the speaker makes a sound. The Bluetooth LED light will begin to blink once this has happened.

The distance of your device to the speaker could be the reason it is not connecting. Try moving the device you are trying to connect closer to the speaker and attempt to connect.

If all else fails, try resetting the speaker to its factory default settings by following these steps:

1. Hold down the “volume down” and “power” button at the same time until you hear a sound. The UE Boom 2 will then turn off.
2. Turn the speaker back on and attempt to pair it with your device again..

The application is not connecting with the speaker and/or it keeps crashing.

Make sure the version of the UE Boom 2 App running on your device is the current version. Go to the App Store/Google Play Store on your device and check for any updates. If there is an update, install it, and reattempt to connect the app to your speaker.

If two devices are connected to the speaker at once, launching the app may cause it to crash. To fix this, disconnect both devices paired with your speaker and only reconnect the one you desire to play music from.

Two Boom speakers will not play music at the same time.

The UE “Double-Up” feature requires bluetooth connections between the device and the two speakers. Make sure bluetooth is enabled on all devices and that they are in range of each other.

Pairing issues may be caused by differences in firmware. To ensure the same firmware, connect the speakers to your smartphone and install the latest firmware by going to the Boom app, tapping on “More”, checking for updates and downloading them.

If you cannot get “Double-Up” to work with the app, follow these steps to manually double-up:

1. Bluetooth pair your device to the first speaker.
2. Turn on the second speaker.
3. Press the + volume button and Bluetooth button at the same time on the first speaker. (A tone should confirm that it is ready.)
4. Press the Bluetooth button twice on the second speaker.
5. A final tone should confirm that it is trying to double-up, and that it has succeeded.

Is there a UE Boom app?

Does UE Boom 2 have an app?

What app is needed to connect to UE Boom 2?